lower flange oor Duits
lower flange
Vertalings in die woordeboek Engels - Duits
Unterflansch
Geskatte vertalings
Vertoon algoritmies gegenereerde vertalings
voorbeelde
Advanced filtering
Voorbeelde moet herlaai word.
lower flange; bottom flange
Anzahl der modernisierten Schiffelangbot langbot
Said pivoting bearing shell (22) is arranged in the recess (5) in the lower flange (4).
Ich lasse das Wasser auf Bakterien testenpatents-wipo patents-wipo
We will take moments about point A so that only the force Ff on the lower flange has to be determined.
Zehntausend Kubaner haben entsprechend der kubanischen Verfassung ein Referendum zur Demokratie in Kuba gefordert.Literature Literature
The lower flange is placed along a longitudinal edge of the web and comprises two lower flange sections each extending from the web essentially in opposite directions.
Der Beschluss #/#/EG, Euratom wird aufgehobenpatents-wipo patents-wipo
The lower flange is formed by bending the web, and the side of the lower flange, which is oriented away from the web, is provided with a facing board.
Schau dir das hier anpatents-wipo patents-wipo
Measure from the base casting lower flange and lift the casting four inches ( 4 " or 100mm ) off the ground by adjusting the four corner leveling screws to the same height.
Sonstige Informationen: a) Beschaffer für die Versuchsanlage für Brennstoffanreicherung in Natanz, b) am Nuklearprogramm Irans beteiligtQED QED
The profiled rail comprises a base body, which is provided, at least in areas with a T-profile and which has a longitudinally extended web as well as a lower flange.
Bist du froh, dass sie sich irrte?patents-wipo patents-wipo
Upper an lower flanges as well as the corrugated web are adapted exactly to structural height and sheet metal thickness. Short delivery time and competitive prices are guaranteed by complete automation.
Lieferung-gegen-Zahlung-System (L/Z-System) (delivery versus payment (DVP) system; delivery against payment systemCommon crawl Common crawl
Plus the application of a 10 kN load on the lower flange of a sliding wall between two connection/attachment points immediately above floor level, over an area: 200 mm high by 300 mm wide.
Sag auf Wiedersehen, KarI!EurLex-2 EurLex-2
The connection element (150) comprises an upper and a lower connection flange (152, 154) between which the sealing strip (22) is clamped.
Sie sind weg!patents-wipo patents-wipo
A multitude of openings are provided in the web, whereby at least one of the lower flange sections is formed by material sections of the web that are folded out from the openings, and the web is provided as a single layer essentially over its entire surface.
Mehr Offenheit bedeutet zudem einen zusätzlichen Anreiz, den höchsten Anforderungen zu genügen.patents-wipo patents-wipo
The existing axle counter equipment allows wheels with lower height of flange to be detected (positive specific case for RS).
Das ist dein Vater in grünEurLex-2 EurLex-2
The invention relates to planks used for sliding on snow, having a central part (1) situated between a lower and upper flange.
Wir suchen nach etwa #. # Dollar in jedem Kofferpatents-wipo patents-wipo
The invention relates to vertical ladder elements and a vertical ladder system for tower elements for tower constructions especially of wind turbines, comprising an upper element flange (13) and a lower element flange (12) between which a tower wall (11) extends, and a vertical ladder (20) that is firmly anchored to the upper element flange (13) and to the lower element flange (12) and extends along the height of the tower element (10).
Bei der Festsetzung von Höchstmengen für Tierarzneimittel in Lebensmitteln tierischen Ursprungs ist es erforderlich, die Tierart, in der Rückstände vorkommen können, die aus dem behandelten Tier gewonnenen relevanten Lebensmittel (Zielgewebe), sowie die Beschaffenheit des für die Rückstandsüberwachung relevanten Rückstandes (Marker-Rückstand) zu spezifizierenpatents-wipo patents-wipo
This is achieved in that the sealing ring (5) surrounds the outer circumference of the lid edge (14), and an upper flange (15) and a lower flange (16) of the sealing ring engage around the lid edge (14). A sealing lip (18) which extends outwards from the outer circumference of the sealing ring is provided on the sealing ring (5), said sealing lip being offset inwards to a certain extent and extending downwards.
Bei interoperablen Systemen legt jedes System in seinen eigenen Regeln den Zeitpunkt der Unwiderruflichkeit fest, um- soweit möglich- sicherzustellen, dass die Regeln aller beteiligten interoperablen Systeme in dieser Hinsicht aufeinander abgestimmt sindpatents-wipo patents-wipo
According to the invention, the tolerance-compensating means (26) are configured so that the winding carrier (21) is pressed by means of a lower flange (24) against the pressed-in cover disc (14) in such a way that a boundary surface (24.1) of the lower flange (24) is seated substantially without gaps against a boundary surface (14.1) of the cover disc (14), in order to form a thermal transition resistance that is as low as possible.
Schneid' s auf!patents-wipo patents-wipo
To achieve a stable bearing of the structures and a great usable extension length with this boom under high force level, the invention proposes that the front bearing (3) has a slide element (10) in the area between the lower flanges (2) only in the region of the curve, and the back bearing (4) has a separate plain bearing half liner (12) in the area between the upper flanges (1) only in the region of each rounded corner (Ri, Ra).
In Artikel # Absatz # werden die ersten drei Unterabsätze gestrichenpatents-wipo patents-wipo
On the lower side 1b the free edge of the lower leg 6b is flanged 180° to round the edge.
So einem schlägt man keinen Blow- Job vorpatents-wipo patents-wipo
The proposal is for the production of a coil former with ends (5) injection moulded in a lower flange (2') for the through connection of suitable terminal pins (3) which can be wound in a section (4) beneath the lower flange (2') with ends of coil windings, in which the terminal pins (3) are flattened beneath the section (4) into a rectangular cross-section (S3) and bent in the region of the flattened section (S3) to form surface-mountable connectors (1).
Ja, ihr wart toll!patents-wipo patents-wipo
329 sinne gevind in 10 ms. Hulle kom uit baie bronne en word nie nagegaan nie.