This specific identification code shall comprise the starting letters ‘MD’ for ‘MODULE’ followed by the approval marking without the circle as prescribed in paragraph 4.3.1.1 below and, in the case several non-identical light source modules are used, followed by additional symbols or characters; this specific identification code shall be shown in the drawings mentioned in paragraph 2.2.1 above.
Deze specifieke identificatiecode moet beginnen met de letters MD voor MODULE, gevolgd door het goedkeuringsmerk zonder de in punt 4.3.1.1 voorgeschreven cirkel en, als diverse niet-identieke lichtbronmodules worden gebruikt, gevolgd door extra symbolen of tekens. Deze specifieke identificatiecode moet op de in punt 2.2.1 bedoelde tekeningen zijn aangegeven.EurLex-2 EurLex-2