geometrically oor Nederlands

geometrically

bywoord
en
in a geometric manner

Vertalings in die woordeboek Engels - Nederlands

geometrisch

bywoord
en
With respect to geometry.
This calibration method shall apply to instruments having a source and receiver with a fixed geometrical shape.
Deze kalibreringsmethode is van toepassing op instrumenten waarvan lichtbron en ontvanger een vaste geometrische vorm hebben.
omegawiki

Geskatte vertalings

Vertoon algoritmies gegenereerde vertalings

voorbeelde

Advanced filtering
Voorbeelde moet herlaai word.
It was the mathematical aspect of surveying that led him to exploring the geometrical significance of complex numbers.
Er is misschien geen manier om ons te beschermen tegen Keeler zijn beschuldiging dat Anne is betrokken was bij iets illegaalsWikiMatrix WikiMatrix
The origin of the angles of geometric visibility is the perimeter of the projection of the illuminating surface on a transverse plane tangent to the foremost part of the lens of the headlamp
Dat bovendien bij de bespreking van deze problematiek door de verschillende instanties ervan uitgegaan werd dat de betrokkentekst nog hetzelfde kalenderjaar in werking zou treden, en er bij de timing van hun activiteiten derhalve rekening werd gehouden met voormelde regelingoj4 oj4
Geometric tortoise
Ben je zeker van de juiste weg?eurlex-diff-2018-06-20 eurlex-diff-2018-06-20
2D or 2.5D geometric representation.
Bij koninklijke besluiten van # april # en van # april # worden de hiernavermelde ambtenaren benoemd tot hoofd van een afdeling (trap III) bij het Centrum voor LandbouweconomieEurLex-2 EurLex-2
GEOMETRICAL REQUIREMENTS
Wanneer ben je hier aangekomen?EurLex-2 EurLex-2
The Strehl ratio has been linked via the work of André Maréchal to an aberration tolerancing theory which is very useful to designers of well-corrected optical systems, allowing a meaningful link between the aberrations of geometrical optics and the diffraction theory of physical optics.
Lieve hemel, hoe kon je dit doen?WikiMatrix WikiMatrix
Since the photometric values required for dipped-beam headlamps do not cover the full geometric field of vision, a minimum value of 1 cd in the space remaining is required for type-approval purposes.
Het ons teamEurLex-2 EurLex-2
(1) Geometrical characteristics: nominal tread diameter.
Tot dan, hou je rustigEurlex2018q4 Eurlex2018q4
On the geometric shapes.
Marvin, waar was je nou in hemelsnaam?OpenSubtitles2018.v3 OpenSubtitles2018.v3
And I couldn't figure it out, but the symmetry of it made me think of mirror images, which led to geometric shapes...
Wat heb jij allemaal gedaan?OpenSubtitles2018.v3 OpenSubtitles2018.v3
A load shall be applied at a speed of 400 ± 20 mm/min to the geometric centre of the buckle-release button along a fixed axis running parallel to the initial direction of motion of the button.
De bijwerkingen en frequenties (waarschijnlijkheid van voorkomen) die hieronder staan zijn bijwerkingen die zijn gezien bij volwassen patiënteneurlex-diff-2018-06-20 eurlex-diff-2018-06-20
Geometric checks
Het liquiditeitsrisico (funding liquidity risk) heeft te maken met de mogelijkheid om uitbreiding van activa te financieren en verplichtingen na te komen wanneer deze invorderbaar wordenEurlex2019 Eurlex2019
3D geometric representation at level of detail (LoD) 3, consisting of the detailed representation of the outer boundary (including protrusions, facade elements and window recesses) as well as of the roof shape (including dormers, chimneys).
WAT IS BUSILVEX EN WAARVOOR WORDT HET GEBRUIKTEurLex-2 EurLex-2
This calibration method shall apply to instruments having a source and receiver with a fixed geometrical shape.
Vóór # januari # verleende rijbevoegdheden worden niet ingetrokken of op welke wijze dan ook anders gekwalificeerd door de bepalingen van deze richtlijnEurLex-2 EurLex-2
2.26. ‘Third of the bonnet top’ means the geometric trace of the area between the side reference lines, measured with a flexible tape following the outer contour of the bonnet top on any transverse section, divided in three equal parts;
Je kunt het niet buiten houdenEurLex-2 EurLex-2
The conformity requirements shall be considered satisfied from a mechanical and a geometric standpoint, in accordance with the requirements of this Regulation, if any, if the differences do not exceed inevitable manufacturing deviations.
Vraag hem om nog wat meer water te halenEurLex-2 EurLex-2
(25) ‘overnight index swap’ or ‘OIS’ means an interest rate swap where the periodic floating interest rate is equal to the geometric average of an overnight rate (or overnight index rate) over a specified term.
Ik zou je nooit kunnen vergeven hebben wat je gezegd hebtEurlex2019 Eurlex2019
For vehicles of such shape that the top end of the straight edge makes first contact with the vehicle then the geometric trace of 1 000 mm wrap around distance, will be used as bonnet leading edge reference line at that lateral position.
Ik had trouwens wat hulp om de Pearl terug te krijgenEurLex-2 EurLex-2
Geometrical effect of vertical curvature
Je wilt de kinderen met de kerst?oj4 oj4
Geometric visibility
Verzoeker voert tot staving van zijn beroep aan dat de stelling van de Commissie dat elke wijziging ter zake van de deelnemers aanhet project nadat de financieringsovereenkomst is gesloten, het voorwerp moet uitmaken van een herzieningsovereenkomst, onjuist is, daar ditvereiste niet uit de financieringsovereenkomst kan worden afgeleidEurLex-2 EurLex-2
Field of geometric visibility
Klopt, we zijn dol op jouEurLex-2 EurLex-2
LAMP SURFACES, AXIS AND CENTRE OF REFERENCE, AND ANGLES OF GEOMETRIC VISIBILITY
Ik tracht het subtiel aan te pakken...... maar je wil het niet begrijpenEuroParl2021 EuroParl2021
It is defined as the geometric trace of the uppermost points of contact between a straight edge 700 mm long and the frontal protection system or the vehicle front (whichever is touched), when the straight edge, held parallel to the vertical longitudinal plane of the vehicle and inclined rearwards by 20°, is traversed across the front of the vehicle, while maintaining contact with the ground and with the surface of the frontal protection system or vehicle.
Aantal cilindersnot-set not-set
Mechanical and geometric characteristics of wheelsets
Het vreselijke nieuwsEuroParl2021 EuroParl2021
an indication of the frequencies of checks and of the tolerances on measured values of the geometrical and dynamic data and of the means used to check them, with for latter an indication of the rules of equivalence with the values of the standard quoted in Subsection
heeft een erg flexibel transformatiesysteemeurlex eurlex
208 sinne gevind in 6 ms. Hulle kom uit baie bronne en word nie nagegaan nie.