cross-track tolerance oor Spaans
cross-track tolerance
Vertalings in die woordeboek Engels - Spaans
XTT
tolerancia perpendicular a la derrota
Geskatte vertalings
Vertoon algoritmies gegenereerde vertalings
voorbeelde
Advanced filtering
Voorbeelde moet herlaai word.
— the functional design dimensions, namely the width of the flangeways, the dimension of nose protection, the running clearance, the height of raised check rails and the track gauge, shall meet the specifications of point 4.3.3 for the elements ‘switches and crossings: functional conditions’ (Point 4.3.3.20) and ‘track gauge and tolerances’ (Point 4.3.3.10) as concerns the design values and their tolerances,
Siempre escondo cosas porque estoy locaEurLex-2 EurLex-2
- the functional design dimensions, namely the width of the flangeways, the dimension of nose protection, the running clearance, the height of raised check rails and the track gauge, shall meet the specifications of point 4.3.3 for the elements "switches and crossings: functional conditions" (Point 4.3.3.20) and "track gauge and tolerances" (Point 4.3.3.10) as concerns the design values and their tolerances,
Mis compañeros encuentran pesadas a sus madres, pero las quierenEurLex-2 EurLex-2
Including tolerance of vehicle to distortion of track, running on curved or twisted tracks, safe running on points and diamond crossings, etc.
Hola, Martín HarveyEurLex-2 EurLex-2
Included are: tolerance of vehicle to distortion of track, running on curved or twisted tracks, safe running on points and diamond crossings, etc.
Apartado # del artículo # del Convenio de # de febrero deEurLex-2 EurLex-2
‘Linear operation’ means an instrument approach operation in which the maximum tolerable error/deviation from the planned track is expressed in units of length, for instance nautical miles, for cross-track lateral deviation.
Deme la manoEurlex2019 Eurlex2019
The mechanical part is made up of a specially designed pulsator, whose task is to examine the position of the bogie in relation to the wagon chassis or body, with respect to both its vertical axle (relative movement due to curves and the normal curving caused on straight sections) and the horizontal axle crossing the wagon (relative movements of the two bogie axles due to irregularities and bumps on the track). The mechanism is specifically sized for every type of bogie and track, certain tolerances being fixed in accordance with the minimum curve radius on the track, the maximum bumps and according to the type of suspension the wagon has.
Tres veces. ojala estuvieramos equivocados, pero...... no lo estamosParaCrawl Corpus ParaCrawl Corpus
11 sinne gevind in 11 ms. Hulle kom uit baie bronne en word nie nagegaan nie.