chamfering oor Hongaars

chamfering

werkwoord
en
Present participle of chamfer.

Vertalings in die woordeboek Engels - Hongaars

leélezés

naamwoord
Ilona Meagher

Geskatte vertalings

Vertoon algoritmies gegenereerde vertalings

voorbeelde

Advanced filtering
Voorbeelde moet herlaai word.
— machined (chamfered) edges,
Sose történik velem ilyenEuroParl2021 EuroParl2021
Preparation of the component parts (e.g. forming and chamfering) must Ö shall Õ not give rise to defects or cracks or changes in the mechanical characteristics likely to be detrimental to the safety of the pressure equipment.
Hátradőlnél egy pillanatra?EurLex-2 EurLex-2
Builders’ joinery and carpentry of wood, including cellular wood panels, assembled flooring panels, shingles and shakes, wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, moulded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed of CN code
Apám imádni fogja ezt a lakomátoj4 oj4
These are normally followed by chamfering and shot-blasting before the packaging.
Szétbaszlak, kisanyám!EurLex-2 EurLex-2
Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, moulded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed
Lány vagyokEuroParl2021 EuroParl2021
Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V‐jointed, beaded, moulded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end‐jointed.
Semmire sem jutottamEuroParl2021 EuroParl2021
Bamboo, incl. strips and friezes for parquet flooring, not assembled, continuously shaped ‘tongued, grooved, rebated, chamfered, V-jointed beaded, moulded, rounded or the like’ along any of its edges, ends or faces, whether or not planed, sanded or end-jointed
Ha találnánk egy másik királynőtEurlex2019 Eurlex2019
The diameter of the upper cylinder may be reduced at the top to 400 mm when a chamfer not exceeding 30 degrees from the horizontal is included.
Ezek vannak a lapokon, oké?EurLex-2 EurLex-2
However, the road components of intermodal transport operations can currently only be undertaken if both the Member States and the transporters follow cumbersome administrative procedures, or if those containers have patented chamfered corners, the cost of which is prohibitive.
Szóval építünk egy újabbat a találmányai közül, és reméljük, hogy ezalkalommal működik?not-set not-set
Machines and robots, in particular for chamfering, welding (electric), surfacing, cutting
Inkább nem mondanám eltmClass tmClass
4. articles of stone which have mouldings or grooves, for example, linear ornamentation, such as fillets, plinths, chamfers, mouldings and beadings;
És a cigarettaEuroParl2021 EuroParl2021
Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, moulded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed
A markunkban vanEurLex-2 EurLex-2
Preparation of the component parts (for example forming and chamfering) must not give rise to surface defects or cracks or changes in the mechanical characteristics likely to be detrimental to the safety of the vessels.
Mindenki kivette a részét?EurLex-2 EurLex-2
Preparation of the component parts (e.g. forming and chamfering) must not give rise to defects or cracks or changes in the mechanical characteristics likely to be detrimental to the safety of the pressure equipment.
Vajon hány rendező csinálfilmet azért, hogy kiélje... szexuális fantáziáit?Szerintem a legtöbbEurLex-2 EurLex-2
Wood (including strips and friezes for parquet flooring, not assembled) continuously shaped (tongued, grooved, rebated, chamfered, V-jointed, beaded, moulded, rounded or the like) along any of its edges, ends or faces, whether or not planed, sanded or end-jointed
De maga igenoj4 oj4
Axle end and chamfer
Háromdimenziós eljárás a reprezentativitás elbírálásáraEurLex-2 EurLex-2
The diameter of the upper cylinder may be reduced at the top to 400 mm when a chamfer not exceeding 30 degrees from the horizontal is included.
Mr.Gorban, nem fogok semmit hivatalosan kérdezniEurLex-2 EurLex-2
machined (chamfered) edges,
Ezt talán saját magaddal kéne megbeszélnedEuroParl2021 EuroParl2021
Floor coverings and mats, of vulcanised rubber (excl. hard rubber), with chamfered sides, rounded corners or shaped edges or otherwise worked (excl. those simply cut to rectangular or square shape and goods of cellular rubber)
Európa és IzraelEurlex2019 Eurlex2019
Preparation of the component parts (e.g. forming and chamfering) must not give rise to defects or cracks or changes in the mechanical characteristics likely to be detrimental to the safety of the pressure equipment
Ezt akartam elmondanieurlex eurlex
Machines for machining radiators and boiler elements, including drilling machines, machines for machining fittings and coupling sleeves, nipple turning machines, machines for machining pipe ends, including chamfering machines, pipe cut-off machines, ingot-turning lathes, combined rotating and drilling machines, surface lathes, screw connection machines, in particular for radiators
Az a pénz teszi ki a bevételünk feléttmClass tmClass
203 sinne gevind in 4 ms. Hulle kom uit baie bronne en word nie nagegaan nie.